ProMarineBlog

Clean-up is never fun. You have the options of using chemicals or non-chemical methods:

NON-CHEMICAL METHOD – Tools Needed & How-to:

  • wax paper 
  • non- stick cooking spray    
  • dish soap
  • paper towels
  1. Lay the wax paper down to protect the tool-cleaning area
  2. While the resin is still wet scrape as much material as you can from the surface using a paper towel (from all the tools that you have used)
  3. Spray the nonstick cooking spray into the measuring cups and then add dish soap as well
  4. With your brush or stir stick – make sure that you scrape all sides
  5. Wipe the measuring cup and the brush/tools that you have used with a paper towel
  6. Rinse tools with warm water and soap
  7. Dry all tools with paper towels – once thoroughly dry they are ready for reuse!

USING THINNER, ACETONE, OR ALCOHOL – Tools Needed & How-to:

  • thinner or acetone or alcohol (follow safety warnings on solvents and provide adequate ventilation)
  • clean cloth or paper towel
  1. Using the solvent selected & paper towels, wipe down tools of excessive material
  2. Wash materials with soap and hot water (this works with plastic stir sticks, epoxy resin spreaders, and mixing cups)
ProMarine Supplies

Welcome to the ProMarine Supplies Blog. Here we hope to provide you with inspiration and insight into epoxy resin products, the latest crafting trends, exciting projects, and so much more!

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
>