Epoxy that has a matte or satin finish is not manufactured anywhere. Our table top epoxy is designed to have a unique high gloss finish when applied to surfaces. Once the product is cured it will give off the appearance of liquid glass. However, this look can be achieved when a coat of matte or satin lacquer is sprayed on top of the epoxy.
Allow the epoxy to fully cure, then follow the manufacturers recommended preparation instructions for the matte finish. This preparation usually involves light sanding and wiping down the surface with solvents before spraying. When using other products with our table top epoxy we always recommend doing a small scale test to make sure the finish comes out just the way you like it.